LessStress - Perfektion für Bohrbrillen

Screw Grinder
Manual

zurück

Screw Grinder

Instruction

The screw grinder can be operated with the power supply used for the LessStress driling unit. If you choose another power supply, it has to have the following specifications: Input 110 - 240 V AC, Output 12 V DC, 2 A.

Before using the LessStress screw grinder, please fix the nut on the screw with Loctite or something similar. Otherwise the torque can loosen the screw again.

1.) Now cut off the screw to the desired length.

Screw Grinder

2.) Now choose the desired depth for grinding by turning the metal top of the screw grinder.

Screw Grinder

3.) Turn the unit on by pressing the switch on the back.

Screw Grinder

4.) Place the screw grinder over the screw. Press your finger against the screw from the other side. This ensures a stable working position and it also enables you to feel if the screw is getting too hot. If this happens, stop the grinding for a moment to allow the screw to cool down again.

Screw Grinder

5.) Check the screw after 1 to 2 seconds to see the result of the grinding. When the screw has the desired length, you use the enclosed tool to deburr the screw.

Screw Grinder

5.) Please wipe off the front surface of LessStress screw grinder after you are finished with your work.

You can change the grinding wheel by using the provided allen key. Unscrew the metal cap, then turn the grinding wheel until you can see the allen screws in the spindle. Now loosen the two allen screws located in the front.

Screw Grinder

Do not loosen the screws in the back! They fix the motor and should not be loosened at any time!


Seite: 0  1 

Design by INCH3 (c) 2005 Interspeed GmbH ::: info@lessstress.de ::: 05204-920667